Sanyo Denki Sanmotion R 3E S, Инструкция по эксплуатации

Страница: 324 / 514

7. Digital Operator
7-17
7.8 Offset adjustment of velocity/ torque command
■
Method of auto offset
■ The method of manual offset
Step
Displayed
character,
number, code
Input button How to operate
1 Push MODE until it displays the left.
2 Display changes and right end LED blinks.
3
Make as the left display with addition and
subtraction and the cursor button.
4 Push WR for more than 1 second.
5 Changes to the left display.
6 Push WR for more than 1 second.
7 Changes to the left display.
8 Push WR for more than 1 second.
9 A display change as the left and it performs.
10
Changes to the display of the left after a normal
end.
Error is displayed when cannot end normally.
11 Push MODE and finish.
12 Changes to the left display.
13 Push MODE.
14 Changes to the left display.
From Process 1 to 7 are the same as auto offset.
7 Changes to the left display.
8 Push subtraction button.
9 Changes to the left display.
10 Push WR for more than 1 second.
11 The data setup is displayed.
12
Adjust offset value with the
addition-and-subtraction button.
13 Push MODE.
14 Changes to the left display.
15 Push MODE and finish.
16 Changes to the left display.
17 Push MODE.
18 Changes to the left display.
MODE
▲ ▼
WR/
MODE
▲ ▼
WR/
MODE
▲
▼
WR/
MODE
▲ ▼
WR/
MODE
▲
▼
WR/
MODE
▲ ▼
WR/
MODE
▲
▼
WR/
MODE
▲
▼
WR/
MODE
▲ ▼
WR/
MODE
▲ ▼
WR/
MODE
▲
▼
WR/
MODE
▲
▼
WR/
MODE
▲
▼
WR/