Sanyo Denki Sanmotion R 3E S, Инструкция по эксплуатации

Страница: 323 / 514

7.7
Auto FF vibration suppression frequency tuning
7-16
7
Di
gita
l O
per
at
or
7.7 Auto FF vibration suppression frequency tuning
■
For stopping during operation, please push the MODE button.
■
Error is displayed when cannot end normally.
Step
Displayed
character,
number, code
Input button How to operate
1 Push MODE until it displays the left.
2 Display changes and right end LED blinks.
3
Make as the left display with addition and
subtraction and the cursor button.
4 Push WR for more than 1 second.
5 Changes to the left display.
6 Push WR for more than 1 second.
7 The character of 8 is drawn and servo is on.
8 Push WR for more than 1 second.
9 A display change as the left and it performs.
10
Changes to the display of the left after a normal
end.
11 Push MODE.
12 Servo is off and changes to the left display.
13 Push MODE.
14 Completes and changes to the left diaplay.
MODE is pushed in Process 2.
Changes to the left display.
MODE is pushed in Process 5.
Changes to the left display and return to Process 2.
MODE is pushed in Process 7.
Changes to the left display and return to Process 5.
MODE is pushed again.
Complete and changes to the left display.
MODE is pushed in Process 9.
Complete and changes to the left display.
Changes to the left display.
Will end, if MODE is pushed.
Completes and changes to the left display.
MODE
▲
▼
WR/
MODE
▲
▼
WR/
MODE
▲
▼
WR/
MODE
▲ ▼
WR/
MODE
▲
▼
WR/
MODE
▲
▼
WR/
MODE
▲ ▼
WR/