Sanyo Denki Sanmotion R 3E S, Инструкция по эксплуатации

Страница: 308 / 514

7. Digital Operator
7-1
7.1 Digital Operator names and functions
It is possible to change or set the parameters and to confirm the status display, monitor display,
test operation and alarm history with the built-in digital operator.
■
Names

Functions
7.2 Modes
It is possible to display the status, to change or set the parameters, to automatically set the notch
filter, to change servo motor, and to confirm test operation, alarm history and monitor display with
the built-in digital operator.
7.2.1 Changing modes
Change in the mode presses the "MODE key." The mode switches in order of the following
figure.
▲ ▼
Up and Down
Key
Displays 5-digit, 7-segment LED
MODE
MODE Switch Key
WR/
Cursor movement, decision,
and writing Key
MODE
WR/
Displayed marks Functions Input time
WR
To input selections and write edited data. More than
1 second
MODE
Changes the Mode. Less than
1 second
Cursor Key Changes the cursor position when editing Less than
1 second
Up/ Down key. Changes the numeric value. Less than
1 second
7 segment LED
Displays monitor value or parameter setting value in
five digits.
－
Status Display,
Fixed Monitor Display
Basic parameter set
General parameter
set
Automatic
adjustment
Test
operation
System Parameter set
Alarm history display
Monitor display
Motor code set