Samsung Ubigate iBG2016, Руководство по настройке

Страница: 708 / 744

CHAPTER 10. Call Admission Control
654
© SAMSUNG Electronics Co., Ltd.
treatment( Optional) Applies call treatment from the session application if the
resource is not available.
The default is
busyout and treatment for global resource triggers.
DSP resource
When there is no DSP resource available, this is the function that cuts calls
until DSP resource is returned. When DSP utilization is more than the
designated value Minor/Major Alarm goes on.
Set up the threshold according to utilization of DSP chip mounted in the
system, not to utilization of DSP resource, use call-admission threshold alarm
max-dsp, and change the initial value using ‘no’ command. The initially set
min value is 70 and max value is 80.
The initial min value is 70, and max value is 80.
call-admission threshold alarm max-dsp [ min < value >] [ maj < value >]
no call-admission threshold alarm max-dsp
min value: Is DSP utilization that Minor Alarm would RAISE/CLEAR, a user
can designate from 1% TO 100%. The initial value is 70.
maj value: Is DSP utilization that Major Alarm would RAISE/CLEAR, a user
can designate from 1% to 100%. The initial value is 80.