Samsung Ubigate iBG2016, Руководство по настройке

Страница: 559 / 744

Ubigate iBG2016 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
505
Configure R2 on DS0 group
R2 Signaling
R2 signaling is channelized E1 signaling used in Europe, Asia, and South
America. It is equivalent to channelized T1 signaling in North America.
There are two types of R2 signaling: line signaling and interregister signaling.
R2 line signaling includes R2 digital. R2 interregister signaling includes R2
compelled, R2 DTMF. These signaling types are configured using the ‘
signal
cas ’ command in the voice-port configuration mode.
Many countries and regions have their own E1 R2 variant specifications,
which supplement the ITU-T Q.400-Q.490 recommendation for R2 signaling.
Unique E1 R2 signaling parameters for specific countries and regions are set
by entering the
cas-custom channel command followed by the country name
command.
Configuring R2 Signaling
Step Command Purpose
1 configure terminal Enter the global configuration mode.
2 voice-port slot/sub-
slot/port:ds0-
group-no
Enter the module configuration mode.
3 Shutdown Shuts down the voice port for further configuration.
4 timeslots timeslot-
list
timeslots-Specifies the single time slot number,
single range of numbers, or multiple ranges of
numbers separated by commas. For E1, allowable
values are from 1 to 31. Examples are as follows:
-2, 3-5
-1, 7, 9
-1-12
5 signal cas { r2-mfc |
r2-dtmf } [ani] determines the type of R2 signaling.
if it is set up as ani-optional entity, it transmits ANI.
6 no shutdown activates the appropriate voice port to refelect the
subject matter set up.
7 show voice port
summary checks out if ds0-group was normally created.
The created ds0-group is displayed in the form of
slot/sub-slot/port:ds0-group-no .