Samsung Ubigate iBG2016, Руководство по настройке

Страница: 533 / 744

Ubigate iBG2016 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
479
(Continued)
Step Command Purpose
6 ring number number (FXO only) Specifies the maximum number of
rings to be detected before an incoming call is
answered by the router.
The default is 1.
7 locale locale Selects the two-letter locale for the voice call
progress tones and other locale-specific
parameters to be used on this voice port
The Default is us
ex) locale us
8 timeouts timer-name
timer-value
To change timeouts parameters
initial - Sets the number of seconds that the
system waits between the caller input of the initial
digit and the subsequent digit of dialed string.
A valid entry is from 0 to 120. The default is 10
interdigit - Configures the number of seconds
that the system waits after the caller has input the
initial digit or a
subsequent digit of the dialed string. If the timeout
ends before the Destination is identified, a tone
sounds and the call ends. This value is important
when using variable-length dial peer destination
patterns(dial plans).
The
seconds argument is the
interdigit timeout wait time in seconds.
A valid entry is an integer from 0 to 120.
The default is 5.
ringing - Specifies the duration that the voice port
allows ringing to continue if a call is not
answered.
The range is from 0 to 60000.
The default is 180. 0 means infinity.
wait-release - Specifies the duration that a voice
port stays in the call-failure state while the device
sends a busy tone, reorder tone, or an out-of-
service tone to the port.
The range is from 0 to 3600. The default is 30. 0
means infinity.