Rvision SEE, Руководство по установке и эксплуатации

Страница: 16 / 64

SEE™ Setup and Operations Manual
Page 8 RVision P/N
660904-01
Rev 1
Connecting Power to the Camera
NOTE: Before starting this procedure ensure that power is connected.
Refer to the camera specifications for the proper voltage input.
The following steps complete the SEE™ setup.
1. Attach SEE2PC DC power cable to the power supply plug.
Figure 9: SEE2PC Power Cable/Plug
2. Thread the collar of the power plug around the power jack.
Figure 10: Connecting the Power Cable/Plug
NOTE: Make sure that the collar of the power plug is fastened securely to
the threads of the DC power jack. The SEE™ camera performs a
calibration procedure when power is applied. The camera moves
left and down before returning to the default home position.
Connecting to the LOOK ™ Controller
The RVison LOOK™ is a stand-alone controller with a Liquid Crystal Display (LCD)
that displays camera video, a joystick to control the pan/tilt/zoom function of the
base unit and attached camera, and a keypad for operator inputs.
DC
power cable
plug
DC
power supply
jack