Rvision SEE, Руководство по установке и эксплуатации

Страница: 33 / 64

Setup and Operations Manual SEE™
RVision P/N 660904-01 Rev 1 Page 25
Presets tab page
The Presets tab page controls the configuration of up to six preset pan and tilt functions.
Figure 31: Presets tab page
Storing a Preset
To store a preset in pSEE
™
perform the following procedure.
1. Move the camera to the desired position.
2. Select desired preset from the pull-down menu located in the upper left corner of
the Presets tab page.
3. Click Get Current.
4. Enter the desired pan and tilt speed (1-24).
5. If the preset is to be used in a tour, check “Last preset in tour” if it will be the
final preset in the tour.
6. If used as part of a tour, enter the dwell time in seconds.
7. Click Set Preset.
NOTE: Camera settings such as zoom will be stored as part of the preset.
Table 5 lists the Preset tab page functions.
Table 5: Preset tab page functions
Function Description
Preset 1 Pull-down menu allows single selection of six
presets.
Get Current Detects the current position of the camera.