Rvision SEE, Руководство по установке и эксплуатации

Страница: 59 / 64

Setting up the SEE™ IP Camera SEE™
RVision P/N
660904-01
Rev 1 A-13
General Video Functions
Select from NTSC and PAL video standards for your camera configuration.
Time
Reboot and Reset
The term “server” in the phrase “Reboot Server” refers to the SEE™IP device.
Factory Reset Not Recommended
Reset the SEE™IP parameters only after consulting with RVision and the network
and administrator.
Video Standard NTSC or PAL signal type
System ID Alphanumeric System ID to be
transferred to remote software
Current Time To update, enter new date and time,
select “Set Current Time”.
Time Zone
For appropriate time zones, Daylight
Savings Time implemented auto-
matically.
Automatically
synchronize
with NTP server
Name of the NTP server should be
registered on NTP server Name.
Camera must have internet access
for this option.
Reboot Server Select “Reboot Server” to power
on reset (POR).
Factory Reset
System log and user registrations
are also cleared.