Rvision SEE, Руководство по установке и эксплуатации

Страница: 2 / 64

RVision P/N 660904-01 Rev 1
Copyright © 2004 - 2010 RVision, Inc. All rights reserved.
WARRANTY CONDITIONS
Our warranty is limited to the repair or replacement of RVision product. RVision reserves the right to decide if a repair
or replacement is warranted.
RVision does not authorize any party to assume for it any other obligation or liability.
RVision warrants that each of the component parts of the system will not malfunction, destruct or fail to operate for a
period of one (1) year when operated as described in RVision documentation and instructions packaged with the
product.
WARNING
The system enclosure is pressurized with nitrogen to keep the camera lens free of condensation. Any attempt to
remove the cover will void the warranty and might cause system damage.
Operating this system in an environment below -15°C or above +50°C can cause permanent damage and will void the
warranty.
See the back of this manual for a complete warranty, liability and copyright statement.
CAUTION
Please read this manual to avoid improper installation. Careless operation of any RVision Pan/Tilt device can result in
injury or system damage.
The SEE™ requires an input voltage of 12-30 volts direct current (VDC). Applying power out of this range may damage
the unit.
Replace the lens cap when not in use. Avoid pointing the camera directly at the sun, lasers, arc welders or other high-
intensity radiation sources; even when no power is applied to the system.
TRADEMARKS
RVision, RVisionUSA, LOOK™, SEE™, SEE™IP, PatrolCCTV™, m3G™, Dual i50™ and other trademarks are
registered trademarks of RVision, Incorporated.
QuickConnect patent is pending. Other trademarks and service marks in this document are the property of their
respective owners.
HYPERTEXT LINKING
Click on underline blue text, a listing in the Table of Contents or other text, where noted, to display another page of the
same or related topic.
TECHNICAL SUPPORT/SALES & MARKETING

techsupport@rvisionusa.com

sales@rvisionusa.com