Rvision SEE, Руководство по установке и эксплуатации

Страница: 36 / 64

SEE™ Setup and Operations Manual
Page 28 RVision P/N 660904-01 Rev 1
Manual Commands tab page
The Manual Commands tab page is used to enter and transmit up to three hexadeci-
mal format commands, for example, commands to change the communications,
baud rate and camera ID.
• “Changing the Cameras Baud Rate” on page 30.
• “Changing the Camera ID” on page 30.
Figure 33: Manual Commands tab page
Table 7 lists the Manual Commands tab page functions.
Defaults Reset all options to factory setting defaults. Do
not use unless prompted by RVision support.
Retries Do not use.
a. Auto-NIR enabled at the factory, unless illuminator is installed.
b. Contact RVision support for document 660032 camera API to modify the default
setting
c. Auto-slow shutter enabled at the factory.
Table 7: Manual Commands tab page functions
Function Description
Send Command Transmit displayed command string to the
SEE™.
List Select from one of multiple pre-formatted
commands.
Send Send selected command from the list.
Run Script Not supported.
Table 6: Misc tab page functions (Continued)
Function Description