Rvision SEE, Руководство по установке и эксплуатации

Страница: 54 / 64

A-8
RVision P/N
660904-01
Rev 1
SEE™ Setting up the SEE™ IP Camera
Motion Detection
Enable Motion Detection, specify active zones within a given image to react to
motion and control the degree of motion reaction with the Sensitivity slider.
Resolution
Selectable video compression resolution:
• NTSC - 720X240, 720X240, 325X480, 325X240
• PAL - 720X576, 720X288, 352X576, 352X288
Video Options and Changing Event Actions
Motion detection events can be configured in this section.
Audio Configuration
This feature is not currently supported.
Frame rate Video frame rate can be limited by network band-
width.
Quality Preference must be set to Quality.
Bitrate Preference must be set to Bitrate.
I-Frame Interval Possible values between 0 and 255. No I-frames if
0 is selected.
Use Motion Detection Turn on/off motion detection operation.
Motion Detection
Area Editing
Configure regions for motion detection.
Sensitivity Set motion detection condition to trigger an
event. The smaller the value, the more sensitive
detection is to movement.
Information Display Display system ID and camera time in web
browser.
Burn-in OSD Insert system ID, date and time in compressed
video.