Rvision SEE, Руководство по установке и эксплуатации

Страница: 17 / 64

Setup and Operations Manual SEE™
RVision P/N
660904-01
Rev 1 Page 9
CAUTION: Connect the video camera cable to the LOOK™ controller
before applying power. If power is applied to the LOOK
™
controller before connecting the camera inputs, damage to
the LOOK
™
controller or the camera may occur.
Run the Cables to Controller
The cable segment of the QuickConnect comes in different lengths from the factory.
Contact sales@rvisionusa.com for additional information about customized cable.
Connectors
The LOOK
™
controller has four connectors located at the bottom of the unit as shown
in Figure 11.
Figure 11: Connector
Table 1 describes the function of the four connectors.
Table 1: LOOK™ Connectors functionality
Connectors Function
Camera Connects to the camera cable
Power Power source (DC only)
Video 1 Video 1 output
Video 2/Audio Video 2 output or microphone output (if equipped)
NOTE: The
Video 2/Audio
connector can be
used as a video or
audio output,
depending on the
camera
configuration.