Rvision SEE, Руководство по установке и эксплуатации

Страница: 43 / 64

RVision P/N 660904-01 Rev 1 Page 35
LOOK™ Single Mode Operation
The LOOK™ controller is available for the SEE™ with one of the following
communication connectors:
• RS232 communication – RVision part number 870010
• RS422 communication – RVision part number 870016
Table 11 contains a list of the key stroke and functionality for the keypad of the
LOOK™ single mode for use with a 2G SEE™ and Mini m3G™ with color cameras.
Table 11: LOOK™ Single mode keypad functions
Function Key(s) Comment
General
Toggle the autofocus
on and off.
Press autofocus (A/F). Light beneath A/F button is on
when A/F is on and off when auto-
focus is off.
Toggle near infra-red
(NIR) low light mode
(black and white).
Press Mode (M). NOTE: Cameras without illumina-
tors are configured for auto-NIR
Autofocus indication The green LED (below A/F) is
on when A/F is on.
– – –
Focus Far Upper small white button. Disable the A/F and press the
upper white button to focus far.
Focus Near Lower small white button. Disable the A/F and press the
lower white button to focus near.
Toggle the color cam-
era’s auto stabiliza-
tion feature.
Hold the 2ND key (shift),
then press HI button. – – –
Activate wiper Hold the 2ND key (shift), and
press the LO button.
Only for 2G SEE™ with a wiper.
Toggle illuminator on/
off.
Hold the 2ND key (shift),
then press the M button.
Only for systems with illuminators.
Calibrate/reset Hold the 2ND key (shift), and
press the A/F button.
– – –
