RTS DKP-4016, Техническое руководство

Страница: 64 / 282

64 Basic Operation DKP-4016
Bosch Security Systems, Inc.
Technical Manual F.01U.308.248 Rev. 03
User Programmable Buttons
A UPG (User Programmable Button) gives you the option to assign frequently used menu items to a single button on the
keypanel, eliminating the need to navigate through the menu structure. Not all menu items can be programmed to the UPG
buttons, such as any assignment group menu, any TIF menu items, or scrolling menu items. Basically, any menu that requires
context or history cannot be saved. If a menu item cannot be saved, a prompt appears in the panel display showing
Cannot
save this menu position .
NOTE: You can program a UPG key to activate the screen saver option on the keypanel. For more information, see “To
activate the screen saver from a UPG key” on page 65.
The UPG keys can also be used to activate relays. When a relay is assigned to the button, and while the keypanel is not in
menu mode, pressing the UPG key activates the relay for as long as the UPG button is held down. Once the button is released,
the relay becomes inactive.
NOTE: The UPG buttons can be cleared using Key Options|Clear from the keypanel menu.
IMPORTANT: On the DKP-4016/4016W keypanel there are nine (9) UPG buttons available – UPG1 through 4 are
displayed on the keypad, while UPG 5 through 9 are available as the SHIFT version of the left column
buttons (MENU, FWD, BACK, UPG3, and UPG4).
To assign a menu item to a UPG button on the DKP-4016/4016W , do the following:
1.
On the DKP-4016/4016W keypad, press the MENU button .
The Information menu appears .
2.
Using the arrow buttons, navigate to the menu item you want to assign to a UPG button.
3.
Press and hold the UPG button for two (2) seconds.
Menu position saved appears in the panel display .
To assign a menu item to a UPG button using the SHIFT menu , do the following:
1.
On the keypad, press the MENU button .
The Information menu appears .
2.
Using the arrow buttons, navigate to the menu item you want to assign to a UPG button.
3.
Press the SHIFT button and then hold the UPG button for two (2) seconds.
Menu position saved appears in the panel display .
To assign a relay to a UPG button , do the following:
1.
On the DKP-4016/4016W keypad, press the MENU button .
The Information menu appears .
2.
From the Information menu, using the arrow buttons, select Service .
3.
Press the SEL button .
The Service menu appears .
4.
Using the arrow buttons, select Local GPIO .
5.
Press the SEL button .
GPIO Inputs and GPIO Outputs appears in the panel display.
6.
Using the arrow buttons, select GPIO Outputs .
7.
Press the SEL button .
Relay 1 and Relay 2 appear in the panel display.
8.
Using the arrow buttons, select the Relay 1, or Relay 2 .
9.
Press the SEL button .
Not Assigned, Talk Key, and UPG 1 through UPG 9 appears in the panel display .