RTS DKP-4016, Техническое руководство

Страница: 186 / 282

186 DKP-4016 Menu System DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Nominal inputs are as follows:
AUX 1 8dBu
Headset Mics -50dBu
Matrix In 8dBu
Panel Mics -42.5dBu
OMNEO 1-2
1
8dBu
To configure gating on the keypanel , do the following:
1.
Starting at the Audio Options|Advanced menu, select Gating .
2.
Press the SEL button .
Aux 1, Front Mic, Left Hdst, Matrix In, OMNEO 1, OMNEO 2, Rear Mic, and Right Hdst appear in the panel display.
(OMNEO 1-8 appears if Audio Package is installed)
3.
Using the left or right arrow buttons, select Aux 1 , Front Mic , Left Hdst , Matrix In , OMNEO 1 , OMNEO 2 , Rear
Mic , or Right Hdst . (OMNEO 1-8 appears Audio Package is installed)
4.
Press the SEL button .
The Threshold scroll menu appears.
5.
Using the up and down arrow buttons, select the threshold you desire.
6.
Press BACK to go to the previous menu item
OR
Press and hold
CLR to exit the menu structure.
Metering
Metering allows you to monitor an audio source connected to the keypanel. The energy of the incoming audio is split into
five (5) bands and displayed on the left side of the keypanel when enabled.
The decibels display range is from 28dB below nominal to 8dB above nominal
The bands are defined as:
Band 1 100 Hz to 400 Hz
Band 2 400 Hz to 800 Hz
Band 3 800 Hz to 1.6 kHz
Band 4 1.6 kHz to 3.2 kHz
Band 5 3.2 kHz to 15 kHz
NOTE: Only one (1) channel can be metered at a time.
1.
OMNEO 1-8 appears if Audio Package is installed.