RTS DKP-4016, Техническое руководство

Страница: 28 / 282

28 Installation DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Speaker 2-Position Terminal Block Connector
The Speaker 2-Position Terminal Block Connector is used to connect an external speaker to the keypanel. This may be a
speaker in another room or a speaker the user likes to use.
Wire Specifications
Solid Wire: 26-16AWG/0.13–1.5mm
2
Stranded Wire: 26-16AWG/0.13–1.5mm
2
Torque: 3.0lb-IN/0.34Nm
WARNING: The positive (+) and negative (-) terminals of the connector should be connected to the positive (+) and
negative (-) terminals of the external speaker. These terminals should never be connected to GND or
permanent damage can occur.
To connect the 2-position terminal block to the keypanel , do the following:
1.
Align the 2-position t erminal block connector with the 2-position connector on the rear side of the keypanel.
2.
Gently push the connector into place.
To detach the 2-position terminal block connector from the keypanel , do the following:
>
Using the thumb and fore-finger, carefully wiggle the 2-position terminal block until is comes free from the
connector.