RTS DKP-4016, Техническое руководство

Страница: 34 / 282

34 Basic Operation DKP-4016
Bosch Security Systems, Inc.
Technical Manual F.01U.308.248 Rev. 03
Tone 500Hz
Enabled Tone 500Hz is enabled on the keypanel.
To enable tone 500Hz, see “Audio Options Menu, Tone Gen” on page 201.
OMNEO Enabled The OMNEO matrix interface is enabled on the panel. For more information on
OMNEO Offers, see“Menu System, OMNEO Offers” on page 222.
OMNEO Disabled The OMNEO matrix interface is disabled on the panel. For more information on
OMNEO Offers, see“Menu System, OMNEO Offers” on page 222.
Virtual Key
Assignment Keys are active on a virtual EKP that are not being displayed. For more information,
see “Key Options Menu, Panel Swap” on page 218.
NOTE:
A talk or listen bar (or both) displays to indicate which type of virtual keys are active.
AFK The AFK (Away From Keypanel) icon displays when a user activates AFK mode and
steps away from the keypanel. Callers are notified the user is AFK and can then leave
a message.
VM The Voice Message icon displays when voice messages are present on the keypanel.
Recording The Recording icon is shown if an AFK panel is actively recording a message or if
the 30-second rolling buffer is enabled.
Supervisor
Mirroring The Supervisor icon signifies the keypanel is mirroring another keypanel and can
make changes to the other keypanel, known as a Target. For more information, see
“Service Menu, Mirror (Control Package Only)” on page 234.
Target Mirrored The Target icon signifies the keypanel is being mirrored by another keypanel, known
as a Supervisor. This keypanel can be taken control of by the Supervisor. For more
information, see “Service Menu, Mirror (Control Package Only)” on page 234.
Matrix In Mute
The Matrix Input volume is muted. When the Matrix Input volume is adjusted down to Mute,
the panel displays this flashing icon as a warning that there is no audio from the Matrix.
Audio Package
Installed The optional audio package is installed. When the Audio package is installed, this
icon appears at power-up and continues to display until the keypanel connects to the
intercom. For more information, see “Audio and Control Packages” on page 279.
Control Package
Installed The optional control package is installed. When the control package is installed, this
icon appears at power-up and continues to display until the keypanel connects to the
intercom. For more information, see “Audio and Control Packages” on page 279.
TABLE 3.
Display Icon Descriptions
Icon Icon Name Description