RTS DKP-4016 Скачать руководство пользователя страница 237

Страница: 237 / 282

DKP-4016

DKP-4016 Menu System 237

Bosch Security Systems, Inc.

Technical Manual

F.01U.308.248

Rev. 03

configure the Gateway Address

, do the following:

Using the arrow buttons, select

Gateway

Press the

SEL button

The Gateway Address appears with the first octet blinking in the panel display.

Using the number pad, enter the

first octet number

in the Gateway Address.

Press the

SEL button

The focus shifts to the second octet

Using the number pad, enter the

second octet number

in the Gateway Address.

Press the

SEL button

The focus shifts to the third octet

Using the number pad, enter the

third octet number

in the Gateway Address.

Press the

SEL button

The focus shifts to the last octet

Using the number pad, enter the

last octet number

in the Gateway Address.

10.

Press the

SEL button

The OKP Setup menu options appear in the panel display

configure the Netmask Address

, do the following:

Using the arrow buttons, select

Netmask

Press the

SEL button

The Netmask Address appears with the first octet blinking in the panel display.

Using the number pad, enter the

first octet number

in the Netmask Address.

Press the

SEL button

The focus shifts to the second octet

Using the number pad, enter the

second octet number

in the Netmask Address.

Press the

SEL button

The focus shifts to the third octet

Using the number pad, enter the

third octet number

in the Netmask Address.

Press the

SEL button

The focus shifts to the last octet

Using the number pad, enter the

last octet number

in the Netmask Address.

10.

Press the

SEL button

The OKP Setup menu options appear in the panel display

configure the Domain name

, do the following:

Using the arrow buttons, select

Domain

Press the

SEL button

The domain name appears with the first character blinking in the panel display.

Using the up and down arrow buttons or the Aux shaft encoder, select a

new character at the current position

Using the left and right arrow buttons or the Main shaft encoder, move to the

next or previous character position

Press

SHIFT

to insert a character at the current position.

Press the

SEL button

OR
Press the

AUX

shaft encoder to move to the next character.

NOTE:

Press BACK or press the MAIN shaft encoder to cancel editing. A confirmation is required.

Press

FWD

or move to the end of the name and Press the SEL button (or the AUX shaft encoder) to save changes.

Repeat

steps 3

until the domain is named.

Содержание DKP-4016



























































































































































































































































































Результаты поиска

Содержание DKP-4016

Отзывы:

Похожие инструкции для DKP-4016

Бренды по названию

Популярные бренды

RTS DKP-4016, Техническое руководство

Результаты поиска

Содержание DKP-4016

Отзывы:

Похожие инструкции для DKP-4016

Бренды по названию

Популярные бренды