RTS DKP-4016, Техническое руководство

Страница: 276 / 282

276 DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
NOTE:
•
It may be necessary to predrill the holes or use screw anchors, depending on the type of material the
wall is constructed.
•
The DKP-4016W is supplied with three (3) wood screws. If you need to use different screws due to
different wall material, be sure to adhere to the following guidelines:
•
Screw diameter: M5
•
Head diameter: no more than 10mm across
•
Head height: no more than 3.5mm tall
2.
Using a screw driver, drive the screws into the predefined holes.
IMPORTANT: It is necessary for all screws to protrude from the wall at approximately the same height. The height
should be 4-6mm from the underside of the screw head to the wall.
– If the screw is inserted too far, the unit cannot latch in place.
– If the screw is not inserted far enough, the unit is not locked in place properly and can potentially fall
off the wall.