RTS DKP-4016, Техническое руководство

Страница: 238 / 282

238 DKP-4016 Menu System DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
9.
Once finished, press the FWD button.
Save Name? appears in the panel display.
10.
Press the SEL button .
To configure DNS Server, do the following:
1.
Using the arrow buttons, select DNS Server .
2.
Press the SEL button .
The DNS 1 Server Address appears with the first octet blinking in the panel display.
3.
Using the number pad, enter the first octet number in the DNS Address.
4.
Press the SEL button .
The focus shifts to the second octet .
5.
Using the number pad, enter the second octet number in the DNS Address.
6.
Press the SEL button .
The focus shifts to the third octet .
7.
Using the number pad, enter the third octet number in the DNS Address.
8.
Press the SEL button .
The focus shifts to the last octet .
9.
Using the number pad, enter the last octet number in the DNS Address.
10.
Press the SEL button .
The OKP Setup menu options appear in the panel display .
Service Menu, Page Change
Page Change is used to select whether you are allowed to change setup pages while talk keys are active. By default, in
Standard Intercom Mode, page changes are allowed when talk keys are active. However, the default in Alternate Intercom
Mode does not allow page changes to occur when talk keys are active.
Available options:
Auto The default is followed depending on the Intercom Mode: Standard or Alternate.
Always Allow Page changes are allowed while Talk Keys are active.
No Talk Keys Page changes are not allowed while Talk Keys are active. A red bar appears above/below the
keys signifying page changes are not allowed. If the talk key is turned off, the red bar turns
blue and page changes can be done.
To configure page change operation , do the following:
1.
Starting at the Service|Page Change menu, select Page Change .
2.
Press the SEL button .
Auto, Always Allow, and No Talk Keys appear .
3.
Using the arrow buttons, select the page change option you desire.
4.
Press the SEL button .
An arrow appears next to the selected option.