RTS DKP-4016, Техническое руководство

Страница: 219 / 282

DKP-4016 DKP-4016 Menu System 219
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Navigation Mode for Panel Swap
Once you have selected the control trigger, select what panel swap action is performed:
Cycle To Cycle to the Next or Previous panel.
Switch To Switch to a specific panel (for example, MAIN, EKP1, EKP2, etc.
The following icon appears briefly when the Main page is showing .
The following icon appears when the first virtual EKP is showing . Subsequent virtual
EKPs display their number in the icon.
Toggle To Toggle between MAIN and a specific virtual EKP.
Unassigned Used to erase the panel swap action from a trigger or control mechanism.
Panel Swap Key States
Key States define what happens to the key states when a row of keys is not currently visible. There are two (2) possible modes
of operation:
Force Off Talk and listen key states are forced off when the row of keys is not visible.
Retain Talk and listen key states are retained when the row of keys is not visible.
When retain is selected and active talk or listen keys are not visible, the following icon shows in the panel
display.
In the menu structure, under Panel Swap, the menu items Control and Key States appear, but are unavailable on the keypanel
until one (1) or more virtual EKPs are enabled.
To enable virtual keypanels , do the following:
1.
Starting at the Key Options|Panel Swap menu, select Virtual EKPs .
2.
Press the SEL button .
None, 1 EKP, 2 EKPs, etc appear in the panel display.
IMPORTANT: The number of virtual EKPs that appear in the selections depends on the number of keys per port the
intercom is configured for.
3.
Using the arrow buttons,

select the maximum number of virtual EKPs to enable .
4.
Press the SEL button .
An arrow appears next to the selected option.
To configure how to access the virtual EKPs from the front of the keypanel , do the following:
1.
Starting at the Key Options|Panel Swap menu, select Control .
2.
Press the SEL button .
GPI Inputs, GPI Outputs, and Keypad appear in the panel display.
3.
Using the arrow buttons,

select the control mechanism desired.
4.
Press the SEL button .
The appropriate sub-control mechanism appears (see “Panel Swap Control Options” on page 218).
5.
Using the arrow buttons,

select the sub-control mechanism .
6.
Press the SEL button .
Cycle To, Switch To, Toggle To, and Unassigned appear in the panel display.
7.
Using the arrow buttons,

select the navigation mode desired.