RTS DKP-4016, Техническое руководство

Страница: 184 / 282

184 DKP-4016 Menu System DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
8.
Press the SEL button .
The Low Freq scroll box and the High Freq scroll box appear in the panel display.
9.
Using the up and down arrow buttons, select the low frequency you desire.
10.
Using the left and right arrow buttons, select the high frequency scroll box .
11.
Using the up and down arrow buttons, select the high frequency you desire.
12.
Repeat steps 4 through 11 for each input.
To adjust the low and high frequency cutoff filters for Outputs , do the following:
1.
Starting at the Audio Options|Advanced|Filters menu, select Equalizer .
2.
Press the SEL button .
Inputs and Outputs appears in the panel display.
3.
Using the arrow buttons, select Output .
4.
Press the SEL button .
Front Spkr and Rear Spkr appear in the panel display.
5.
Using the arrow buttons, select either Front Spkr or Rear Spkr .
6.
Press the SEL button .
Frequencies, Gains, Mode and Presets appear in the panel display.
7.
Using the arrow buttons, select Frequencies .
8.
Press the SEL button .
The Low Freq scroll box and the High Freq scroll box appear in the panel display.
9.
Using the up and down arrow buttons, select the low frequency you desire.
10.
Using the left and right arrow buttons, select the high frequency scroll box .
11.
Using the up and down arrow buttons, select the high frequency you desire.
12.
Repeat steps 4 through 11 for each output.
To configure the 5-band gain for inputs , do the following:
1.
Starting at the Audio Options|Advanced|Filters menu, select Equalization .
2.
Press the SEL button .
Inputs and Outputs appears in the panel display.
3.
Using the arrow buttons, select Input
4.
Press the SEL button .
Front Mic, Left Mic, Matrix In, Rear Mic, and Right Hdst appear in the panel display.
5.
Using the left and right arrow buttons, select the input desired.
6.
Press the SEL button .
Frequencies, Gains, Mode, and Presets appear in the panel display
7.
Using the left or right arrow buttons, select Gains .
8.
Press the SEL button.
The 1: through 5: band scroll boxes appear in the panel display.
9.
Using the up and down arrow buttons, select the gain level you desire for Band 1.
10.
Using the left and right arrow buttons, select the Band 2 scroll box .
11.
Using the up and down arrow buttons, select the gain level you desire Band 2.
12.
Repeat setting the gain levels on the remaining bands .
13.
Repeat steps 4 through 11 for each input, desired.
To configure the 5-band gain for outputs , do the following:
1.
Starting at the Audio Options|Advanced|Filters menu, select Equalization .
2.
Press the SEL button .
Inputs and Outputs appears in the panel display.
3.
Using the arrow buttons, select Output