RTS DKP-4016, Техническое руководство

Страница: 239 / 282

DKP-4016 DKP-4016 Menu System 239
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Service Menu, Reset Cfg
Reset Cfg restores almost all custom settings to the defaults and erases all stored autodial numbers. Reset Cfg does not change
the selected alpha size, intercom mode, poll ID, headset transfer state, or reset the IP configuration.
To reset the keypanel configuration , do the following:
1.
Starting at the Service|Reset Cfg menu, select Do Reset .
2.
Press the SEL button .
Configuration Reset appears in the panel display .
Service Menu, Scrn Saver
Scrn Saver allows the user to configure the way the screen saver feature operates.
Available selections for this menu are:
Activate Allows the user to activate the screen saver immediately (used to test current display settings).
Delay Allows the user to set the delay for Display Dim (for example, when the display will dim) and
to set the delay for Activation (for example, when the screen saver becomes active). Both
features can be set from 30 minutes, up to 12 hours, or disabled.
Display Dim Allows the user to set the brightness of the panel display from 0-100%. This setting is a
percentage of the current LCD brightness. For example, if you configured your backlight for
60%, then in this menu, 100% is equal to 60% and 0% is equal to 35%.
Mode Can be set to Bitmap, Display Off (sleep mode), or Text.
The default setting for this option is:
Delay One (1) hour for both display dim and screen-saver activation
Display Dim 25%
Mode Text
NOTE: Activating any lever key, keypad button, or shaft encoder deactivates the screen-saver, as will an incoming call.
To manually activate the screen saver , do the following:
1.
Starting at the Service|Scrn Saver menu, select Activate .
2.
Press the SEL button .
The screen saver is activated on the keypanel panel display .
To set the delay option for the keypanel screen saver , do the following:
1.
Starting at the Service|Scrn Saver menu, select Delay .
2.
Press the SEL button .
Display Dim and Activation appear in panel display .
3.
Using the left and right arrow buttons, select Display Dim .
4.
Press the SEL button .
The Delay Time: scroll box appears in the panel display.
5.
Using the arrow buttons,

select the amount of time you want to expire before the display dims.
6.
Press BACK .
Display Dim and Activation appear in panel display .
7.
Using the left and right arrow buttons, select Activation .