RTS DKP-4016, Техническое руководство

Страница: 233 / 282

DKP-4016 DKP-4016 Menu System 233
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
6.
Press the SEL button .
Key Group, Not Assigned, and Talk Key appear in the panel display.
7.
Using the arrow buttons,

select Key Group .
8.
Press the SEL button .
Group 1, Group 2, Group 3, and Group 4 appear in the panel display .
9.
Using the arrow buttons,

select the group to be controlled by the GPIO Input.
10.
Press the SEL button .
Level and Edge appear in the panel display.
11.
Using the arrow buttons,

select Level or Edge .
12.
Press the SEL button .
An arrow appears next to the selected option.
To setup a GPIO Input to track its corresponding GPIO Output , do the following:
1.
Starting at the Service|Local GPIO menu , select GPIO Inputs .
2.
Press the SEL button .
Opto 1 and Opto 2 appear in the panel display .
3.
Using the arrow buttons,

select Opto 1 or Opto 2 .
4.
Press the SEL button .
Function and Mode appear in the panel display.
5.
Using the arrow buttons, select Mode .
6.
Press the SEL button .
Normal and Track Output appear in the panel display.
7.
Using the arrow buttons,

select Track Output .
8.
Press the SEL button .
An arrow appears next to the selected option.
To configure local control of a GPIO Output , do the following:
1.
Starting at the Service|Local GPIO menu, select GPIO Outputs .
2.
Press the SEL button .
Relay 1 and Relay 2 appear in the panel display .
3.
Using the arrow buttons,

select Relay 1 or Relay 2 .
4.
Press the SEL button .
Not Assigned, Talk Key and UPG 1 through UPG 9 appear in the panel display.
5.
Using the arrow buttons,

select the method you want to control the GPIO Output.
If a UPG key is selected, configuration is finished.
6.
Press the SEL button .
Tap Key appears in the panel display . If Talk Key is selected proceed to the next step.
7.
Tap the key to be used to trigger the GPIO Output.
The selected keypanel key turns red.