RTS DKP-4016, Техническое руководство

Страница: 201 / 282

DKP-4016 DKP-4016 Menu System 201
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Volume Control
Available selections for the Volume Control menu are:
NOTE: For more information on Ganged Volume configuration, see “Audio Options Menu, Ganged Vols” on
page 192.
Ganged The volume controls are tied to each other, only one (1) knob is turned to adjust volume levels.
The volume of both front and rear headset speakers are controlled together.
Individual The volume controls are independent of each other.
To define how the Main shaft encoder controls the volume for the front and rear channels , do the following:
1.
Starting at the Audio Options|Speaker menu, select Volume Control .
2.
Press the SEL button .
Ganged and Individual appear in the panel display .
3.
Using the left or right arrow buttons, select either Ganged or Individual .
4.
Press the SEL button .
An arrow appears next to the selected option .
Audio Options Menu, Tone Gen
Tone Gen (tone generation) allows the user to turn the tone generator on or off. The tone generator is used to check the audio
path from the keypanel to the matrix.
Available selections for this menu are:
500Hz Tone (default)
1kHz Tone
To enable/disable the tone generator , do the following:
>
Starting at the Audio Options|Tone Gen menu, select Tone Off to disable the tone generator.
OR
Using the left or right arrow buttons, select
Tone On to enable the tone generator.
An arrow appears next to the selected option .
To set the frequency level for the tone , do the following:
1.
Starting at the Audio Options|Tone Gen menu, select Frequency .
2.
Press the SEL button .
1kHz Tone and 500Hz Tone appears in the panel display.
3.
Using the left or right arrow buttons, select 1kHz Tone or 500Hz Tone .
An arrow appears next to the selected option. If tone is enabled, an icon indicating 500Hz or 1kHz displays once the
menu is exited.