RTS DKP-4016, Техническое руководство

Страница: 23 / 282

DKP-4016 Installation 23
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Add the DKP-4016/4016W to the Device Catalog in IPedit
To add the keypanel to IPedit , do the following:
1.
Open IPedit .
2.
From the Device menu, select Add .
The Add Devices Window appears, open to the Search tab .
3.
Select the keypanel .
The Add button becomes active .
4.
Click the Add button .
The OKP-2/8 appears in the device catalog in the left panel .
5.
Click the Done button .
The Add Devices window closes .
Configure the DKP-4016/4016W using IPedit
To configure the keypanel using IPedit , do the following:
Using the Device Configuration and Status Pane
1.
In the Device Name field, enter a device name familiar to you.
Initially, keypanels are given a default name.
IMPORTANT: If you change the device name, this causes the device to reboot. It is not necessary to change the device
name. However, if you do change the name, it is best to do this early in the setup so you do not have to
revisit other devices that connect to this device and update them later.
2.
In the Description field, enter a description for the keypanel , if desired.
Using the Channel Configuration and Status Section:
3.
In the Channel Description field, enter a channel description , if applicable.
4.
From the Destination Type drop down menu, select OMI .
NOTE: The Destination Type does not need to be selected if using the Browse window to select the device. It fills
the type and IP Address automatically. The type can be OMI-16, OMI-332, OMI-48, or OMI-64 depending
on the license.
5.
In the Destination Device Name field, enter the name of the device to which the channel will connect.
OR
Click the
... button.
The Discovered Devices Window appears .
a.
Expand the ree to view the destination devices available.
b.
From the expanded tree, select the device to which you want to connect this keypanel.
c.
Click OK .
6.
From the Destination Channel drop down menu, select the channel to which the keypanel will connect.
7.
Send the changes to the keypanel.