4–8 • Advanced Operation
CrossOver 16 User Manual (v4.0)
For More Information on...
• configuring GPI banks, refer to the section
“General Purpose Interface (GPI)” on page 4-14.
To apply an offset to LTC timecode data:
1.
Press
MENU
.
2.
Press the
SYSTEM
Wipe Pattern button.
3.
Press
NEXT
until
Config LivEDL
is
displayed.
4.
Press the
Config LivEDL
knob to display
the
EDL Configuration
menu.
5.
Press
NEXT
until
LTCOff
is displayed.
6.
Use the
LTCOff
knob to select an offset (in
frames) to apply to the LTC timecode.
Note:
• LTC offsets are only available if you are using a
GearLite TSC-9902 LTC to Serial Converter.
Capturing EDL Data
Capturing EDL data is manually started and stopped.
You can retrieve EDL files via an FTP connection or
by saving them to a USB drive. You can delete EDL
files from the switcher to free space for more data
capture.
It is strongly recommended that you use a GearLite
TSC-9902 LTC to Serial Converter to provide
timecode information when capturing EDL data.
To start capturing an EDL file:
1.
Press
MENU
.
2.
Press the
USER
Wipe Pattern button.
3.
Press the
LiveEDL
knob to display the
LiveEDL
menu.
4.
Use the
left knob to select the EDL file you
wish to capture to.
5.
Press the
Start
knob.
Note:
• A maximum of 999 EDL files may be present on
the switcher.
For More Information on...
• installation and configuration of the TSC-9902
LTC to Serial Converter, refer to your TSC-9902
documentation.
To stop capturing an EDL file:
1.
Press
MENU
.
2.
Press the
USER
Wipe Pattern button.
3.
Press the
LiveEDL
knob to display the
LiveEDL
menu.
4.
Press the
Stop
knob.
Saving, Deleting, and Accessing EDL Files
You can save captured EDL files to a USB drive,
delete files from the switcher to make room for more
data capture, and access EDL files stored internally
on the switcher via an FTP connection.
To save or delete a captured EDL file
1.
Insert a USB drive into the USB port if you are
saving EDL files.
2.
Press
MENU
.
3.
Press the
USER
Wipe Pattern button.
4.
Press the
LiveEDL
knob to display the
LiveEDL
menu.
5.
Use the
left knob to select the EDL file you
wish to save or delete.
6.
Save or delete the EDL file by performing one
of the following:
• Press the
Save
knob to save the EDL file
to a USB drive connected to your switcher.
• Press the
Delete
knob to delete the EDL
file.
7.
Press the
Confrm
knob to perform the save
or delete. Press the
Cancel
knob to cancel
the save or delete.
Note:
• Wait 5 seconds after inserting a USB drive into the
USB port before using it.
• If you select a file that has no captured EDL data,
the save and delete options are not available.
To Access EDL files via an FTP connection
1.
Create an FTP connection from a computer to
your switcher using the following user account:
• name:
liveedl
• password:
password
2.
Copy EDL files from the switcher to your
computer for use in your NLE suite.
MENU
NEXT
NEXT
MENU
MENU
MENU
Содержание CrossOver 16
