CrossOver 16 User Manual (v4.0)
Advanced Operation • 4–9
3.
Close the FTP connection.
For More Information on...
• creating an FTP connection, refer to the section
“Creating an FTP Connection” on page 4-6.
Using Internal Timecode with EDL Files
If you are not using a Ross Video GearLite
TSC-9902 LTC to Serial Converter to provide
timecode information, you may use an internally
generated base timecode that begins at 0 when EDL
capture begins.
You may specify an offset that is applied to the base
timecode to meet individual requirements.
To apply an offset to internally generated base
timecode:
1.
Ensure that the switcher Editor setting is not set
to
LTC
.
2.
Press
MENU
.
3.
Press the
SYSTEM
Wipe Pattern button.
4.
Press
NEXT
until
Config LivEDL
is
displayed.
5.
Press the
Config LivEDL
knob to display
the EDL Configuration menu.
6.
Press
NEXT
until
Hour Minute Second
is displayed.
7.
Use the
Hour
knob to select the required
hours offset.
8.
Use the
Minute
knob to select the required
minutes offset
9.
Use the
Second
knob to select the required
seconds offset.
For More Information on...
• configuring the switcher Editor setting, refer to the
section “Editor Control” on page 2-13
Reset Options
You can restore the entire switcher or individual
settings to default values. Menu items can also be
reset.
You can also capture the state of the switcher as a
user-defined default, allowing you to reset to those
settings at any time.
Note:
• Default transition rates vary depending on the
frequency of the selected video format.
Configuring Default Settings
You can customize many of the default switcher
parameters and save them as a user-defined default.
To configure user-defined defaults:
1.
Configure the switcher as desired. This will
become the new default state.
2.
Press
MENU
.
3.
Press the
RESET
Wipe Pattern button.
4.
Press
NEXT
until
Attrib
is displayed.
5.
Use the
Attrib
knob to select
Media
.
6.
Set whether Media-Store channels are included
in the reset as follows:
• Use the
Media
knob to select the
Media-Store channel you wish to configure.
• Use the
Value
knob to select whether the
Media-Store channel is included in the reset.
You can choose from the following:
›
NoRst
— The Media-Store channel is not
reset. Any loaded image or animation is
retained.
›
Reset
— Any loaded image or animation
is removed and the Media-Store channel is
returned to the default state.
7.
Use the
Attrib
knob to select
Aux
.
8.
Set whether Aux buses are included in the reset
as follows:
• Use the
Aux
knob to select the Aux bus
you wish to configure.
• Use the
Value
knob to select whether the
Aux bus is included in the reset. You can
choose from the following:
›
Reset
— The Aux bus is included in the
reset.
›
NoRst
— The Aux bus is not included in
the reset.
9.
Press
NEXT
until
RState Save
is
displayed.
10.
Press the
RState Save
knob to save the
new default settings.
MENU
NEXT
NEXT
MENU
NEXT
NEXT
Содержание CrossOver 16
