Ross CrossOver 16, Руководство оператора

Страница: 27 / 92

CrossOver 16 User Manual (v4.0) Configuration • 2–11
Loading Color Schemes
You can load a custom color scheme or one of the
preset color schemes that are included on your
switcher.
To load a custom Panel Glow color scheme:
1. Press MENU .
2.
Press the
USER
Wipe Pattern button.
3.
Press the
Scheme
knob to display the
Color Scheme
menu.
4.
Press
NEXT
until
Load
is displayed.
5.
Use the
Load
knob to select the color
scheme you want to load. You can select from a
list of presets or one of the custom color
schemes you have previously saved.
6.
Press the
Load
knob to load the color
scheme.
7. Press the Confrm knob to commit the load.
Press the Cancel knob to cancel the load.
Mnemonic Display
You can control the brightness and contrast of the
mnemonic display on your switcher.
To modify mnemonic brightness and contrast:
1. Press MENU .
2. Press the USER Wipe Pattern button.
3. Press the Mnmncs knob to display the
Mnemonics menu.
4. Use the Cntrst knob to adjust the mnemonic
display contrast.
5.
Use the
Bright
knob to adjust the mnemonic
display brightness.
Power-Save Mode
The switcher goes into a Power-Save mode after a
user-defined amount of time (20 minutes by default)
without user interaction. Touching any control will
wake the switcher. Any functionality associated with
the touched control is ignored until the unit is active
and all lights and display are turned on.
During Power-Save mode, video related hardware is
not affected and video signals are still passed through
the switcher.
To configure the power-save timeout:
1. Press MENU .
2.
Press the
PERS
Wipe Pattern button.
3.
Press the right knob to set the switcher
power-save behavior. You can choose from the
following:
•
PwrSve
— All buttons and the menu display
turn off. The switcher conserves as much
power as possible without affecting on-air
video.
•
Sleep
— The menu display turns off.
Buttons light and slowly fade in a raindrop
pattern.
4. Use the right knob to set the power-save
timeout (in minutes). You can select a value
from 0 (off) to 999 minutes.
Transition Rate Units
You can select the units used to specify durations for
various video transitions. Choose the units that you
are most comfortable working with.
To select the units for switcher transitions:
1. Press MENU .
2. Press the PERS Wipe Pattern button.
3. Use the Rate knob to select the units used to
specify switcher transition rates. You can choose
from the following:
• Frames — Switcher transitions are specified
in frames.
• Secnds — Switcher transitions are specified
in seconds.
Double-Press Rate
You can set the double-press rate of the switcher to
suit your preference. Setting a fast rate requires you
to double-press the knobs in quick succession in
order to be recognized as a double-press. Setting a
slow rate allows more time between presses but may
register two single presses as a double-press.
To set the switcher double press rate:
1. Press MENU .
2. Press the PERS Wipe Pattern button.
3. Press the DblPrs Speed knob.
MENU
NEXT
MENU
MENU
MENU
MENU