Ross CrossOver 16 Скачать руководство пользователя

Страница: 74 / 92

6–8 • Memories, USB Storage, and Upgrades

CrossOver 16 User Manual (v4.0)

To upgrade the switcher software:

Copy a software upgrade file onto a USB drive.

Insert the USB drive with the software upgrade
file into the USB port.

Press

MENU

Press the

RESET

Wipe Pattern button.

Press

NEXT

until

Run Software Upgrade

From USB

is displayed.

Press the

left knob to display the

Upgrade

menu.

Select an upgrade file to use as follows:

• Use the

left knob to browse the USB drive

file system. Turning the knob cycles through

all the files and directory names at the current
level in the file system.

• Navigate to sub-directories by selecting a

sub-directory name and then pressing the

left knob. Sub-directories are displayed as

<directory-name>

• Return to a parent directory by selecting

<..>

• Use the left knob to select the upgrade file

you wish to use.

Press the

left knob to load the upgrade file.

Press the

Confrm

knob to initiate an

upgrade. Press the

Cancel

knob if you do

not wish to perform an upgrade.

The menu displays a message indicating the software
upgrade is in progress. The

Upgrade

LED on the

rear of the switcher is lit, indicating an upgrade is in
progress.

Note:

• Wait 5 seconds after inserting a USB drive into the

USB port before using it.

• Turn the middle knob when browsing the file

system to display the full text of long directory
lists and filenames.

• Upgrades can take several minutes to complete.

• If

CRITICAL UPGRADE

is displayed, the

switcher is performing an upgrade that includes
low-level software components. This does not
indicate a problem with your switcher.

For More Information on...

• accessing the USB port, refer to the section

“Frame Overview” on page 1-3.

Completing a Software Upgrade

When the software upgrade is complete, the menu
displays a message indicating the software upgrade
was successful, the Upgrade LED on the rear of the
switcher turns off, and the switcher performs an
automatic restart.

Once the switcher restarts, it is ready to use. You can
then safely remove the USB drive.

Note:

• If you are upgrading a switcher as a result of a

corrupt configuration or a previously failed
upgrade, you may need to reconfigure the network
address and reload switcher memories.

For More Information on...

• configuring the network address of your switcher,

refer to the section “IP Address” on page 2-9.

• reloading switcher memories, refer to the section

“Recalling Memory Registers” on page 6-4.

MENU

NEXT

Содержание CrossOver 16





























































































Результаты поиска

Содержание CrossOver 16

Отзывы:

Похожие инструкции для CrossOver 16

Бренды по названию

Популярные бренды

Ross CrossOver 16, Руководство оператора

Результаты поиска

Содержание CrossOver 16

Отзывы:

Похожие инструкции для CrossOver 16

Бренды по названию

Популярные бренды