Roche Nimblegen MS 200, Руководство оператора

Страница: 57 / 104

NimbleGen MS 200 Microarray Scanner Operator’s Manual v1.0 | 45
2. If necessary, open the Parameter Control (Figure 24) by clicking the
slide’s
Open Parameter Control button ( ) in the Magazine Control.
3. In the Parameter Control, click Load .
4.
Choose the parameter file and click Open .
5.
Click Apply to confirm.
4.2.2 Processing the Same Slide Multiple Times
You can scan an individual slide a maximum of 12 times. Each time the slide
is processed is referred to as a
cycle .
To create a cycle:
1.
If open, close the Parameter Control by clicking the Close Parameter
Control button ( , Figure 25).
2. Go to the slide row in the Magazine Control (Figure 24), right-click,
and select
Add Cycle .
3. Specify parameters for the cycle as described in “Specifying Scan
Parameters” on page 41.
To delete a cycle:
1. If open, close the Parameter Control by clicking the Close Parameter
Control button ( , Figure 25).
2. Go to the slide row in the Magazine Control (Figure 24), right-click,
and select
Delete Cycle .