Riso RZ2xx Series, Техническое руководство

Страница: 329 / 374

RISO Inc. Technical Communications
us.riso.com
CHAPTER 17: TEST MODE
[ 17 - 17 ]
No. Unit check Details
G-Lever mounting position.
Stops the machine at G-Lever mounting position (print drum at 104.1 degrees from Position-A).
* This is the test mode to activate when mounting the removed G-Lever back on the machine.
Print drum ink-code copy
Copies the ink information (ink color, ink category, etc.) onto the Print Drum PCB from the Ink TAG.
0905
0908
Brings the print pressure control unit to the point where the Pressure Spring can be removed for the machine maintenance purpose.
Print-pressure one cycle action. [RZ3 series only]
Performs the following operation:
1. Brings the print pressure control unit to the home (center) position.
2. Moves to the print pressure control unit to the Maximum pressure print position, and stops for 1 second.
3. Returns the print pressure control unit to the home (center) position.
4. Moves to the print pressure control unit to the Minimum pressure print position, and stops for 1 second.
5. Returns the print pressure control unit to the home (center) position.
Print-pressure maintenance positioning. [RZ3 series only]
0900
0889
0904
0890
0892
0901
Machine Position-B stop. (The position in which the print drum can be removed from the machine.)
Stops the print drum at machine Position-B. (The test mode can be activated with or without print drum in the machine.)
Resets the print pressure to the center (home) position.
Performs the following operation:
1. Moves the vertical print position unit to the home (center) position.
2. Moves the vertical print position unit to the maximum TOP (image to the top 16mm) position, and stops for 1 second.
3. Returns the vertical print position unit to the home (center) position.
4. Moves the vertical print position unit to the maximum DOWN (image to the tail 16mm) position, and stops for 1 second.
5. Returns the vertical print position unit to the home (center) position.
Print-pressure home positioning. [RZ3 series only]
Vertical-centering action
Moves the vertical print position to the home (center) position.
Vertical print position one cycle action.
No. Data check Details
0921 Print-drum angle display Displays the present print-drum angle. (example: 3600 = 360°)
0923 Print-drum ink temperature display Displays the temperature of the ink in the print drum in degrees Celsius [°C].
0925 Ink remaining volume display Displays the amount of ink left in the ink tube in percentage (%) [Ink TAG information]
0926
Ink motor FG count
[ For the digit of 100 milliliter and up ] Displays the amount of ink used from ink tube for the digit of 100 milliliter and up.
1 = 100 milliliter (example: for 345.6 milliliter use, the display shows 3).
0927
Ink motor FG count
[ For the digit of 10 milliliter and down ] Displays the amount of ink used from ink tube for the digit of 10 milliliter and down.
1 = 0.1 milliliter (example: for 345.6 milliliter use, the display shows 456).
0928 Displays the Ink use starting date. [RZ3 series only]
Displays the Ink usage starting date.
Example: For year 2004 February 28th, the display shows 2004 and then 0228 and repeats.]
No. Data setting Details
Description Adjusts the angle to detect master on the print drum by master loading sensor.
Setting
Range : -20° to 10° from the programmed default position
(+ delays the detection timing)
-200 to +100 (example: 100 = 10°)
Unit : 5 (0.5°)
Default : 0 (0°)
Description Adjusts the print-drum Position-A stop position.
Setting
Range : -4.0° to +4.0° from the programmed default position
(+ moves drum forward)
-40 to +40 (example: 5 = 0.5°)
Unit : 5 (0.5°)
Default : 0 (0°)
Master loading sensor detection timing adjustment
Print-drum Position-A adjustment
0940
0941