manualshive.com logo in svg

Riso RZ2xx Series, Техническое руководство, Страница: 172 / 374

Поделиться
Скачать
Riso RZ2xx Series Скачать руководство пользователя страница 172

RISO Inc. Technical Communications

   us.riso.com

CHAPTER 10:  MASTER REMOVAL SECTION

[ 10 - 4 ]

3. Removed Master Vertical Transport Mechanism

At the start of the clamp plate opening action to remove the master from the drum, the master removal motor
activates to rotate the master removal rollers to catch the leading edge of the removed master from the drum.
With the continued rotation of the print drum, the removed master is transferred into the master disposal box
by the master removal rollers.

Once the master removal action has started and the print drum rotates to position-A, the main motor stops,
and also the master removal motor deactivates 0.5 seconds later.

Whether the master has arrived into the master disposal area or not is checked by the master removal
sensor at drum angles 120 degrees and 180 degrees during the master removal action.

The master removal roller speed is checked by the master removal motor FG sensor, and the speed can be
adjusted by test mode No. 578.

After the master removal action ends, the master-guiding-plates A and B are raised by the master compression
plate to clear the path for the oncoming master on the next master removal action.

1005

1006

Pulley shaft

Master removalsensor

Master removal roller (upper)

Master removal roller
(bottom)

Master removal
pulley

Master removal motor

Master removal

pulley

Master removal

roller (upper)

Pulley shaft

Master  removal sensor

Master removal roller (bottom)

Master compression
plate

Master-guiding-plate

Master-guiding-plate B

Master-guiding-plate A

Master-guiding-plate B

Master removal motor FG sensor

Master compression plate

Print drum

Содержание RZ2xx Series























































































































































































































































































































































































Отзывы:

Нет отзывов