Rion KL-04, Инструкция по эксплуатации

Страница: 8 / 166

vi
WARNING
Sample fl uid danger prevention
When toxic sample fl uid comes into contact with any part of the human body or when
toxic gases generated by the sample fl uid are breathed, there is a danger of severe injury
or death.
Sample fl uid also involves the risk of fi re, explosion, corrosion, deformation and other ef-
fects when other objects are in the surrounding area. Observe the following points closely
to prevent leakage and adherence of sample fl uid.
Do not pass hydrofl uoric acid or other sample fl uids which can cause corrosion of
fl uid-contacting parts (their materials are described in the specifi cations) through the
system.
Observe the following points when setting up or dismantling a measurement system.
- Check the sample fl uid for any risks due to toxicity or other harmful properties.
- Make sure that sample fl uid cannot leak from the system and come into contact
with body parts, clothing etc.
- When attaching or detaching tubes, connectors etc., always use appropriate protec-
tive tools and wear dual-layer gloves.
- Double-check all connections before starting the sample fl uid fl ow.
When using sample fl uid which may produce harmful gases, provide adequate ventila-
tion as prescribed by applicable laws and regulations.
Before and after measurement, clean the entire sample fl uid system thoroughly to re-
move any remnants. Otherwise unwanted effects such as thermal build-up, hardening,
particle accumulation etc., can occur. This is especially important to prevent the pos-
sibility of serious accidents when using the unit to measure different types of sample
fl uids.
Before starting to prepare the system for storage, complete the cleaning process with
pure water and verify neutrality (pH7).
Dispose of waste sample fl uid only as prescribed by applicable laws and regulations.
Never mix waste sample fl uid with other substances unless absolute safety has been
established.