Rion KL-04, Инструкция по эксплуатации

Страница: 65 / 166

49
Measurements
4. Press the “Show” button on the “KL-04 -
Measurement” window. Select Measurement
Parameter from the displayed menu.
The “KL-04 - Measurement Parameter”
window appears. Check the contents. After
checking, press the “Quit” button to close
the “KL-04 - Measurement Parameter”
window.
5. Set out a sample to clean (normally purifi ed
water).
6. Clean by either clicking the “Flush” button
or pressing the “FLUSH” button on the front of the unit.
Important
When operating by pressing the “FLUSH” and “START” buttons
on the unit, ensure that the “KL-04 - Measurement” window is
set in an active window in which the required Measurement
Parameter name is displayed. If it is not in an active window,
operations may be different from the specifi ed Parameter.
7. Carry out a Blank Measurement. To do this, measure either by clicking the “Start”
button on the display or pressing the “START” button on the front of the unit.
8. If the Blank Measurement exceeds the target value, return to step 6.
If it is less than the target value, set out a measuring sample.
9. Measure the sample. For this, either click the “Start” button or press the “START”
button on the front of the unit. The measuring operation starts. During this opera-
tion, a window indicating the measuring status is displayed.
When the measurement is completed, the measurement result will be displayed
on the “KL-04 - Measurement” window.
10. If required, enter a sample name in the “Sample” space, the sample number in the
“No.” space, and memos in the “Memo” space.
Note
Sample names, sample numbers and Memos can be written-in
to the displayed Measurement (accessible during the Measuring
operation). The sample number will be incremented for each
Measurement startup when the ‘Clear “No.” Field at Measure-
ment Start?’ is not checked on the Measurement Parameter and
fi gures are entered. The Memo spaces will be cleared on each
Measuring startup.
The Measured Data will be stored to the hard disk every time.