Rion KL-04, Инструкция по эксплуатации

Страница: 110 / 166

94
Print
Error window appearing temporarily after upgrade
After the version upgrade process was carried out, an error message will appear when you
fi rst attempt to print from any window (see page 143). This is only temporary and does
not indicate a problem. Click the “Close” button in the error window to close the window,
and then proceed with printing. The error window will not appear the next time.
However, the temporary error window will appear for each operator separately.
Printing from KL-04 - Measurement window
When you click the “Print” button in the “KL-04 - Measurement” window, you can select
one of two printing methods: “Print...” and “Print This Data”. If you select “Print This
Data”, the window shown on page 92 will not appear, and the previously selected settings
for printing data will be used (selected at any previous window after “Print...”).