Rigaku Progeny Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 122

background image

Getting Started with your Progeny Analyzer

13

1006232_RevD

Removing/Installing the Battery

To operate your instrument, a rechargeable Lithium ion battery specified by RAD (14.4 V) must be
installed.

1.

Powering off the instrument (see “Powering Off”)

Important:

Do not remove or replace the battery while your instrument is powered on. Doing so can
cause system errors, power-up issues, and other software problems. When these occur,
return your instrument to RAD or your local RAD representative for repairs.

2.

Disengage the battery latch and slide the battery out of the slot.

3.

To install the battery, orient the battery so that the notched corner faces away from you and to
the right.

4.

Hold the battery latch in the disengaged position then insert and slide the battery into the
battery slot.

5.

Slide the battery into the battery slot until the battery latch clicks into place.

Charging the Battery

After installing the battery, if Power Status (Figure 5) indicates that power is low, charge the battery.

1.

Insert the AC-adapter power cord into the connector behind the battery-compartment door.

2.

Plug the AC adapter into an appropriate electrical outlet (120/240V).
An indicator appears on the screen:



If your instrument is powered-off a small screen on the battery shows percentage.



If your instrument is powered-on the Power Status icon -

- displays on the right side of

the screen Status bar (Figure 5).

Note:



A full charge takes approximately 1 ½ - 2 hours.



The instrument may be used while charging.



If you have a docking stating (optional) the device charges when docked.

Powering Your Instrument

Progeny Analyzers have three power modes—power on, power off, and sleep or “power saving” mode.
All power modes are available when either the battery is installed and charged, or your instrument is
connected to the AC adapter.

Powering On

1.

Ensure that either the battery is installed or the AC adapter is connected and plugged into an
electrical outlet.

«
...
18
19
20
21
22
...
»

Содержание Progeny



























































































































Отзывы:

Нет отзывов

Похожие инструкции для Progeny

Бренд: Magnetic Instrumentation Страницы: 63

Бренд: Yamaha Страницы: 98

Бренд: Valcom Страницы: 1

Бренд: YATO Страницы: 36

Бренд: Anritsu Страницы: 29

Бренд: VWR Страницы: 44

Sensorex SX41170SI

Бренд: Meggitt Страницы: 19

Speedrite Fault Finder

Бренд: Tru-Test Страницы: 2

Ocean Optics HR2000 Series

Бренд: Halma Страницы: 42

Бренд: Roland Страницы: 2

Бренд: Lumel Страницы: 40

Бренд: Hameg Страницы: 40

Бренд: S&T Страницы: 23

LaserRange-Master T4 Pro

Бренд: LaserLiner Страницы: 68

Бренд: BC Biomedical Страницы: 9

MLS 50-3...N series

Бренд: KERN Страницы: 16

Бренд: Avtech Страницы: 40

Бренд: Danfoss Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды