Ricoh Leo-C2/P2, Технический бюллетень

Страница: 228 / 308

T
echnical
B
ulletin
PAGE: 1/8
Model:
Leo-C2/P2
Date:
31-Oct-18
No.:
RD0A5037
Subject:
FSM Correction: Filling Dev. and Initialization for 5
th
Models
Prepared by:
S. Tomoe
From:
1st CP Business Department CP Business Center
Classification: Troubleshooting
Mechanical
Paper path Part information
Electrical
Transmit/receive Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2 Tier 0.5
Please apply the following corrections/additions in red to your FSM in section.
Filling Developer and Initialization for 5-station Models
This procedure is only valid when installing the first special color. If there is already 1 special color
installed and an additional special color has to be installed, please use the installation procedure "5th
Station Replacement Kit Type S9 (D899)"
1. Make sure the main power switch is turned to OFF
2. Open the front doors.
•
Keep both the front doors open until pouring developer is complete.
3. Turn the main power switch to ON. DO NOT CLOSE THE DOORS.
4. Enter the SP mode.
5.
Set SP3-106-001 (4st/5st Selection) to “1: 5st”.
6.
Configure the following SPs.
•
SP3-107-001 (Fifth Station: Color Selection)
•
SP3-107-002 (Fifth Station: Special Color ID)
•
SP3-107-003 (Fifth Station: Pattern ID1)
•
SP3-107-004 (Fifth Station: Pattern ID2)
Color
You will install
3-107-001
Color Selection
3-107-002
Special Color ID
3-107-003
Pattern ID1
3-107-004
Pattern ID2
Default 2 0 1 1
Clear 2 1 1 1
White 3 2 2 2
Neon Yellow 2 3 1 1
Neon Pink 2 4 3 1
Invisible Red 2 5 4 1
7. Turn the main power switch to OFF.