Ricoh Leo-C2/P2, Технический бюллетень

Страница: 153 / 308

T
echnical
B
ulletin
PAGE: 15/18
Model:
Leo-C2/P2
Date:
12-Jul-18
No.:
RD0A5024

Increase the value by approximately “12” per 0.1mm/400
㎜
of skew of
Side 2 to Side 1.
5.
Restore the value to “10” (the value before adjustment) in the following SPs.
・
SP1-053-001 (Auto Reg Exec Conditions: No. of Sheets: Side 1 Adj.)
・
SP1-053-003 (Auto Reg Exec Conditions: No. of Sheets: Side 2 InitAdj.)
・
SP1-053-007 (Auto Reg Exec Conditions: No. of Sheets: Side 2 Front & Back
6.
Verify the results by printing out the confirmation sheet with Auto Adjust Image
Position as done in Step 3. If results are unsatisfactory, repeat Step 4.
d. Slant Adjustment Paper Skew - Trailing Edge Correction in Main Scan
Direction
See adjustment ‘c’ above for the cause of the problem.
In this adjustment, you will correct the slant in main scan direction using trapezoidal
correction.
1.
Increase the value by approximately “11” per 0.1mm of skew of Side 2 to Side 1.In
Set SP1-143-001
201 to “500” (Default).
2.
Change the value to “1” in the following SPs.
Adjustment is possible using only one sheet.
•
SP1-053-001 (Auto Reg Exec Conditions: No. of Sheets: Side 1 Adj.)
•
SP1-053-003 (Auto Reg Exec Conditions: No. of Sheets: Side 2 InitAdj.)