Ricoh Leo-C2/P2, Технический бюллетень

Страница: 160 / 308

T
echnical
B
ulletin
PAGE: 4/23
Model:
Leo-C2/P2
Date:
20-Mar-18
No.:
RD0A5025
SOLUTION
Optimize the print parameters to enhance toner transferability. Select the most suitable
adjustment from the tables below according to the paper and print procedure in use.
Symptom observed on rough / textured paper in jobs with no White undercoat
Paper type Print procedure Adjustment Note
Semi-rough DC / High speed A
Rough AC / High speed
B
AC transfer is applied, but
productivity does not decrease.
Textured AC / Low speed C
Adjustment for ‘Textured’ paper
ONLY. Do not use if otherwise.
Note: Productivity decreases.
Symptom observed in jobs printed of White toner as undercoat
Paper type Print procedure Adjustment Note
Paper types that
have smooth
paper surface 1-pass
(DC / Low speed)
D
Black and White toner bottles are
swapped to print White as an
undercoat in 1-pass.
(See Appendix 2.)
Paper types that
have smooth
paper surface
2-pass
(Job is printed in
two passes without
swapping the Black
and White toner
bottles.)
(E)
This is not an adjustment. Simply
create a new custom paper.

Plain

Matte
F
Rough
B
Do the same procedure twice; first
for the White undercoat and next in
FC.
Textured
C
Important :

For all adjustments except Adjustment (E), make sure to import a generic media entry
from the master library. DO NOT create a new custom media from scratch, or the
adjustments will not take effect.

Printing White undercoat in 1-pass is recommended only with media with smooth
surface (e.g. Coated, Metallic). Otherwise, print in two passes.