REMEHA Avanta Plus 24s Скачать руководство пользователя

Страница: 38 / 153

Remeha Avanta Plus

Changing the factory settings could result in the boiler not
working properly.

LT.AL.W7H.000.047

The parameters can be changed from the stand-by status as
follows:

•

Press the

[enter]

-key

and briefly the

[reset]-

key

until

codes

and

appear alternately in the display.

•

Press the

[+]

-key

until access code

is displayed.

•

Press the

[enter]

-key until

appears (codes

[

and

[

are displayed alternately);

•

This parameter can now be changed as follows;

•

Press the

[enter]

-key; the set value for the maximum flow

temperature now appears e.g.;

(75°C).

•

Press the

[+]

[-]-

key to change this value, for example to

(65°C).

•

Press

[enter]

-key to confirm the value; codes

[

and

[

are displayed alternately.

•

Press the

[+]

-key

to change

the next parameter, etc.

•

Press

[reset]

-key to return to the operating mode.

The boiler will automatically return to the normal operating
mode if no keys are pressed for 10 minutes.

2.9.9 Changing the maximum output (Hi) for CH operation

The maximum output for CH operation can be changed with
parameter

p 17

(maximum fan speed) and is set standard

to a speed of 3700, 4100 or 5000 rpm. See the speed-input
ratio figures.

This parameter can be changed from the stand-by status as
follows:

LT.AL.W7H.000.048

•

Press the

[enter]

-key

and briefly the

[reset]-

key

until

codes

and

appear alternately in the display.

•

Press the

[+]

-key

until access code

is displayed.

•

Press the

[enter]

-key until

appears (codes

[

and

[

are displayed alternately);

•

Press the

[+]

-key

to go to parameter

•

Press the

[enter]

-key until

p17

appears (codes

[

and

are displayed alternately);

•

Press the

[+]

[-]-

key to change this value for Avanta

Plus

28c, for example to

(4600 rpm corresponds with 22

kW).

•

Press

[enter]

-key to confirm the value.

•

Press

[reset]

-key to return to the operating

mode.

Содержание Avanta Plus 24s


























































































































































Результаты поиска

Содержание Avanta Plus 24s

Отзывы:

Похожие инструкции для Avanta Plus 24s

Бренды по названию

Популярные бренды

REMEHA Avanta Plus 24s, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Avanta Plus 24s

Отзывы:

Похожие инструкции для Avanta Plus 24s

Бренды по названию

Популярные бренды