R&S FSVA3000 Series, Руководство пользователя

Страница: 628 / 1268

General Instrument Setup
R&S
®
FSVA3000/ R&S
®
FSV3000
628 User Manual 1178.8520.02 ─ 01
12.9.3 Calibration Signal Display
Access : [Setup] > "Service" > "Calibration Signal"
Alternatively to the RF input signal from the front panel connector you can use the
instrument's calibration signal as the input signal, for example to perform service func-
tions on.
NONE .........................................................................................................................628
Calibration Frequency RF .......................................................................................... 628
└ Spectrum ......................................................................................................628
└ Frequency .................................................................................................... 629
Calibration Frequency MW .........................................................................................629
NONE
Uses the current RF signal at the input, i.e. no calibration signal (default).
Remote command:
DIAGnostic:SERVice:INPut[:SELect]
on page 1096
Calibration Frequency RF
Uses the internal calibration signal as the RF input signal.
Remote command:
DIAGnostic:SERVice:INPut[:SELect]
on page 1096
DIAGnostic:SERVice:INPut:PULSed:CFRequency
on page 1095
Spectrum ← Calibration Frequency RF
Defines whether a broadband or narrowband calibration signal is sent to the RF input.
"Narrowband" Used to calibrate the absolute level of the frontend at 64 MHz.
Service Functions