R&S FSMR, Руководство по эксплуатации

Страница: 662 / 955

MMEMory - Subsystem R&S FSMR
1313.9723.12 6.1-126 E-1
MMEMory:LOAD:STATe 1,<file_name>
This command loads device settings from files. The contents of the file are loaded and set as the
new device state. The device automatically recognizes the files that are required for the whole setup
from the list of file extensions:
Contents Extension
Current setting of measurement hardware and
associated title, if indicated .SET
Activated limit lines .LIN
Current configuration of general device
parameters .CFG
Configuration for the hardcopy output .HCS
User-defined color setting .COL
All defined limit lines .LIA
Measured data trace 1 to trace 3 screen A .TR1 to 3
Measured data trace 1 to trace 3 screen B .TR4 to 6
Tracking generator settings
(only with Option Ext. Generator Control B10)
.TCi
Setting for source calibration
(only with Option Ext. Generator Control B10)
.TS1
.TS2
Correction data for source calibration
(only with Tracking Generator Option B9 or Ext.
Generator Control B10)
Correction data for source calibration
(only with Option Ext. Generator Control B10)
.TC1
.TC2
Activated transducer factors .TF
The file name includes indication of the path and may also include the drive name. The path name
complies with DOS conventions.
Parameter: <file_name> ::= DOS file name without extension, extensions see table
Example: "
MMEM:LOAD:STAT 1,'A:TEST'"
Characteristics: *RST value: -
SCPI: conforming
This command is an event and therefore has no *RST value and no query.
MMEMory:MDIRectory <directory_name>
This command creates a new directory. The file name includes indication of the path and may also
include the drive name. The path name complies with DOS conventions.
Parameter: <directory_name>::= DOS path name
Example: "
MMEM:MDIR 'D:\USER\DATA'"
Characteristics: *RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.