R&S FSMR Скачать руководство пользователя страница 346 | Manualshive

Страница: 346 / 955

R&S FSMR Скачать руководство пользователя страница 346

Display

R&S FSMR

1166.3363.12

4.18-4

E-1

LOGO

ON OFF

The

LOGO ON/OFF

softkey switches the Rohde & Schwarz

company logo displayed in the upper left corner of the display
screen on or off.

IEC/IEEE-bus command:

DISP:LOGO ON | OFF

ANNOTATION

ON OFF

The

ANNOTATION ON/OFF

softkey switches the displaying of

frequency information on the screen on and off.
ON Frequency information is displayed.
OFF Frequency information is not outputted to the display. This

can be used for example to protect confidential data.

IEC/IEEE-bus command:

DISP:ANN:FREQ ON | OFF

DATAENTRY

OPAQUE

The

DATAENTRY OPAQUE

softkey sets the data entry windows to

opaque. This means that entry windows are underlayed with the
background color for tables.

IEC/IEEE-bus command:

--

DEFAULT

COLORS 1

DEFAULT

COLORS 2

The

DEFAULT COLORS 1 and 2

softkey restores the default

settings for brightness, color tint and color saturation for all display
screen elements.
The color schemes have been selected to give optimum visibility of
all picture elements at an angle of vision from above or below.

DEFAULT COLORS 1

is active in the default setting of the

instrument.

IEC/IEEE-bus command:

DISP:CMAP:DEF1

DISP:CMAP:DEF2

DISPLAY

PWR SAVE

The

DISPLAY PWR SAVE

softkey is used to switch on/off the

power-save mode for the display and to enter the time for the
power-save fuction to respond. After the elapse of this time the
display is completely switched off, ie including backlighting.

This mode is recommended for saving the TFT display especially when
the instrument is exclusively operated in remote control.

The power-save mode is configured as follows:

•

The first keystroke activates the power-save mode and opens
the editor for the response time (

POWER SAVE TIMEOUT

). The

response time is entered in minutes between 1 and 6 minutes
and is confirmed by

ENTER

.

•

The power-save mode is deactivated by pressing the key again.

On  leaving  the  menu  with  the  power-save  mode  in  the  activated
state,  the  softkey  is  highlighted  in  color  on  returning  to  the  menu
and  opens  again  the  editor  for  the  response  time.  Pressing  again
the key switches off the power-save mode.

IEC/IEEE-bus command:

DISP:PSAV ON

DISP:PSAV:HOLD 15

«
...
344
345
346
347
348
...
»

Содержание FSMR




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов