R&S FSMR, Руководство по эксплуатации, Страница: 664 / 955

MMEMory - Subsystem R&S FSMR
1313.9723.12 6.1-128 E-1
MMEMory:SELect[:ITEM]:ALL
This command includes all data subsets in the list device settings to be stored/loaded.
Example: "
MMEM:SEL:ALL"
Characteristics: *RST value: --
SCPI: device-specific
MMEMory:SELect[:ITEM]:DEFault
This command sets the default list of device settings to be stored/loaded. The latter includes:
•
current configuration of general device parameters (general setup)
•
current setting of the measurement hardware including markers
•
activated limit lines
•
user-defined color setting
•
configuration for the hardcopy output
•
Tracking generator settings
(only in conjunction with option Tracking Generator B9 or External Generator Control B10)
•
Correction data for source calibration
(only in conjunction with option Tracking Generator B9 or External Generator Control B10)
Trace data and non-used limit lines are not included.
Example: "
MMEM:SEL:DEFault"
Characteristics: *RST value: --
SCPI: device-specific
This command is an event and therefore has no *RST value.
MMEMory:SELect[:ITEM]:HWSettings
ON | OFF
This command includes the hardware settings in the list of data subsets of a device setting to be
stored/loaded. The hardware settings include:
•
current configuration of general device parameters (general setup)
•
current setting of the measurement hardware including markers
•
activated limit lines:
A data set may include 8 limit lines at maximum in each measurement window. This number
includes the activated limit lines and, if available, the de-activated limit lines last used.
Therefore the combination of the non-activated restored limit lines depends on the sequence of
use with the command
MMEM:LOAD
.
•
user-defined color setting
•
configuration for the hardcopy output
•
Tracking generator settings
(only in conjunction with option External Generator Control B10)
•
Correction data for source calibration
(only in conjunction with option External Generator Control B10)
Example: "
MMEM:SEL:HWS ON"
Characteristics: *RST value: ON
SCPI: device-specific
MMEMory:SELect[:ITEM]:LINes:ALL
ON | OFF
This command adds all limit lines (activated and de-activated) to the list of device settings to be stored/loaded.
Example: "
MMEM:SEL:LIN:ALL ON"
Characteristics: *RST value: ON
SCPI: device-specific