R&S FSMR, Руководство по эксплуатации

Страница: 694 / 955

SENSe:CORRection Subsystem R&S FSMR
1313.9723.12 6.1-158 E-1
[SENSe<1|2>:]CORRection:TRANsducer:DATA <freq>,<level>..
This command defines the reference values of the transducer factor selected. These values are
entered as a sequence of frequency/level pairs. The frequencies must be sent in ascending order.
Prior to this command, the command
SENS:CORR:TRAN:SEL
must be sent. The level
values are sent as dimensionless numbers; the unit is specified by means of the
command
SENS:CORR:TRAN:UNIT.
Example: "
:CORR:TRAN:TRANsducer:DATA 1MHZ,-30,2MHZ,-40
"
Characteristics: *RST value: -
SCPI: device-specific
[SENSe<1|2>:]CORRection:TRANsducer:DELete
This command deletes the selected transducer factor.
Prior to this command, the command
SENS:CORR:TRAN:SEL
must be sent.
Example: ":
CORR:TRAN:DEL
"
Characteristics: *RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value.
[SENSe<1|2>:]CORRection:TRANsducer:GENerate <name>
This command generates a transducer factor <name> using normalized trace data. The function is
only available when normalization is switched on.
Parameter: <name>::= Name of the transducer factors as string data with up to 8
characters.
Example:
"CORR:TRAN:GEN 'FACTOR1'"
Characteristics: *RST value: -
SCPI: device-specific
[SENSe<1|2>:]CORRection:TRANsducer:SCALing LINear | LOGarithmic
This command defines whether the frequency scaling of the transducer factor is linear or logarithmic.
Prior to this command, the command
SENS:CORR:TRAN:SEL
must be sent.
Example: "
:CORR:TRAN:SCAL LOG
"
Characteristics: *RST value: LINear
SCPI: device-specific