R&S FSMR, Руководство по эксплуатации, Страница: 200 / 955

R&S FSMR Measurement Receiver Mode
1166.3363.12 4.4-44 E-2
SWEEP
COUNT
The SWEEP COUNT softkey activates the window for entering the number of
sweeps that the R&S FSMR performs after a single sweep has been started. If
Trace Average, Max Hold or Min Hold has been activated, the number of
averages or maximum value findings is specified as well.
Example: [ TRACE1 : MAX HOLD ]
[ SWEEP : SWEEP COUNT : {10} ENTER ]
[ SINGLE SWEEP ]
The R&S FSMR performs the Max Hold function across ten sweeps.
The value range permissible for the sweep count is 0 to 32767. If the sweep
count is 0 or 1, a sweep is performed. With trace averaging and if the sweep
count is 0, the R&S FSMR performs sliding averaging across ten sweeps in
continuous sweep mode; if the sweep count is 1, no averaging occurs.
The sweep count is valid for all traces in a diagram.
IEC/IEEE bus command:
SENS:SWE:COUN 64
Setting the number of sweeps in the Trace menu is identical with setting them in the
Sweep menu.
In the SINGLE SWEEP setting, the measurement is stopped once the selected
number of sweeps has been reached.
SGL SWEEP
DISP OFF
The SGL SWEEP DISP OFF softkey starts a sweep and switches off the display
during a single sweep. Once the sweep is completed, the display is reactivated
and the trace displayed.
IEC/IEEE bus command:
INIT:DISP OFF;:INIT