R&S FSMR, Руководство по эксплуатации

Страница: 821 / 955

R&S FSMR Comparison of R&S FSMR and FSE Commands
1166.3363.12 6.3-22 E-1
Devices Command Parameter Notes
FSET [SENSe<1|2>:]FREQuency:STARt:FLINe[:STATe] ON | OFF not available for R&S FSMR.
Replaced by
CALC:MARK:FUNC:SLIMits
FSE [SENSe<1|2>:]FREQuency:STARt:LINK CENTer | STOP | SPAN not available for R&S FSMR
R&S FSMR +
FSE
[SENSe<1|2>:]FREQuency:STOP 0 to f
max
frequency ranges are different
for R&S FSMR and FSE
FSET [SENSe<1|2>:]FREQuency:STOP:FLINe[:STATe] ON | OFF not available for R&S FSMR;
replaced by
CALC:MARK:FUNC:SLIMits.
FSE [SENSe<1|2>:]FREQuency:STOP:LINK CENTer | STARt | SPAN not available for R&S FSMR
FSET/
ESI
[SENSe<1|2>:]FREQuency[:CW|:FIXed] f
min
to f
max
not available for R&S FSMR
FSET/
ESI
[SENSe<1|2>:]FREQuency[:CW|:FIXed]:STEP f
min
to f
max
not available for R&S FSMR
R&S FSMR [SENSe<1|2>:]LIST:POWer:RESult? new function for R&S FSMR
R&S FSMR [SENSe<1|2>:]LIST:POWer[:SEQuence] <analyzer freq>,
<ref level>,<rf att>,<el att>,
<filter type>,<rbw>,<vbw>,
<meas time>,
<trigger level>,... new function for R&S FSMR
R&S FSMR [SENSe<1|2>:]LIST:POWer:SET <PEAK meas>,
<RMS meas>,
<AVG meas>,
<trigger mode>,
<trigger slope>,
<trigger offset>,
<gate length> new function for R&S FSMR
R&S FSMR [SENSe<1|2>:]LIST:POWer:STATe ON | OFF new function for R&S FSMR
FSE [SENSe<1|2>:]MIXer:BIAS <numeric_value> not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:BIAS:LIMit:MIN <numeric_value> not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:BIAS:LIMit[:MAX] <numeric_value> not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:BLOCk ON | OFF not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:HARMonic <numeric_value> not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:HARMonic:BAND A | Q | U | V | E | W | F | D |
G | Y | J not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:HARMonic:TYPE ODD | EVEN | EODD not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:LOSS:HIGH <numeric_value> not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:LOSS:TABLE <file_name> not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:LOSS[:LOW] <numeric_value> not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:PORTs 2 | 3 not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:SIGNal 2 | 3 not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer:THReshold 0.1 to 100 dB not available for R&S FSMR
FSE [SENSe<1|2>:]MIXer[:STATe] ON | OFF not available for R&S FSMR
R&S FSMR [SENSe<1|2>:]MPOWer[:SEQuence] <analyzer freq>,
<rbw>,<meas time>,
<trigger source>, <trigger
level>, <trigger offset>,
<type of meas>,
<# of meas> new function for R&S FSMR
R&S FSMR [SENSe<1|2>:]MPOWer:RESult[:LIST]? new function for R&S FSMR
R&S FSMR [SENSe<1|2>:]MPOWer:RESult:MIN? new function for R&S FSMR
FSE [SENSe<1|2>:]MSUMmary:AHOLd[:STATe] ON | OFF not available for R&S FSMR
and FSET
FSE [SENSe<1|2>:]MSUMmary:MODE ABSolute | RELative not available for R&S FSMR
and FSET
FSE [SENSe<1|2>:]MSUMmary:MTIMe 0.1S | 1S not available for R&S FSMR
and FSET
FSE [SENSe<1|2>:]MSUMmary:REFerence <numeric_value> not available for R&S FSMR
and FSET
FSE [SENSe<1|2>:]MSUMmary:REFerence:AUTO ONCE not available for R&S FSMR
and FSET
FSE [SENSe<1|2>:]MSUMmary:RUNit PCT | DB not available for R&S FSMR
and FSET
FSET [SENSe<1|2>:]PM[:DEViation]:RANGe[:UPPer] <numeric_value> not available for R&S FSMR
R&S FSMR +
FSE
[SENSe<1|2>:]POWer:ACHannel:ACPairs 0 to 3 R&S FSMR: new parameter
value 0 for channel power
measurement