R&S FSMR, Руководство по эксплуатации

Страница: 656 / 955

INSTrument Subsystem R&S FSMR
1313.9723.12 6.1-120 E-1
MEMory - Subsystem
MEMory:CORRection enables the administration of automatically saved correction sets in operating
mode Tuned RF Level.
BEFEHL PARAMETER EINHEIT KOMMENTAR
MEMory
[:CORRection]
:CATalog?
:DELete
:ALL
[:NAME]
:SELect
<setup_name>
<setup_name> --
--
Query only
No query
No query
No query
MEMory[:CORRection]:CATalog?
This command resturns the names of all saved correction sets and the corresponding settings.
Hint:
The correction sets are named by the frequency. A possible response could be:
’100000000’,’23.Feb 05 08:45’,’NRP-Z11’,1, ’200000000.33’,’23.Feb 05 12:34’,’NRP-Z22’,0,
’2350000035.683’,23 Feb 05 14:59,’’,0
Ordering of data:
- Frequency in Hz
- Date and time of acquisition
- Used Power meter
- Power splitter use
The order of the data sets is as it is set in manual operation. All data are strings except Power splitter
use.
Example: "
MEM:CAT?"
MEMory[:CORRection]:DELete:ALL
This command deletes all correction data sets for Tuned RF Level of FSMR.
Example: "
MEM:DEL:ALL
This command is an event and therefore has no *RST value and no query.
MEMory[:CORRection]:DELete[:NAME] <name>
This command deletes a correction data set with the given name for Tuned RF Level of FSMR.
Example: "
MEM:DEL
’100000000’
'correction set 100MHz
"
MEM:DEL
’200E6’
'correction set 200MHz
Hint: The correction sets are named by the frequency.
This command is an event and therefore has no *RST value and no query.
MEMory[:CORRection]:SELect <name>
This command activates a correction data set with the given name for Tuned RF Level of FSMR.
Example: "
MEM:SEL
’100000000’
Hint: The correction sets are named by the frequency.
This command is an event and therefore has no *RST value and no query.